Coliving design: what developers should plan for in shared space
How developers can weigh private against shared space in a coliving scheme, size kitchens and laundry, control noise and pick finishes that cope with daily use.
Published9 min read

On this page
A coliving scheme can win planning and hold its budget and still struggle once people move in. Typical causes are a kitchen that is too small at 7pm, nowhere to take a call except a bedroom, and a washing machine behind a bedroom wall. These are drawing-stage mistakes, and they cost far more to fix after handover.
This guide covers coliving design from the developer’s side: how to weigh private against shared space, what kitchens, desks, laundry and storage need, and where sound control and finishes repay their cost. Where a rule applies, we cite it, and design judgement is labelled as such.
How much private space versus shared space should a coliving scheme have?
There is no ratio that works everywhere, and we haven’t found a published one worth trusting. Treat it as a decision with a price on each side: the more a resident gets behind their own door, the less the shared rooms have to carry, and the other way round.
A room with its own shower room, a kitchenette or a proper desk takes on more of the resident’s day. That raises the cost per bed but takes pressure off the shared kitchen and lounge. A smaller room with a shared bathroom costs less per bed, and the shared spaces then have to work much harder. Neither is wrong. The mistake is drawing small rooms, promising a strong community, and then fitting a kitchen for six into a house of ten.
Local standards already contain part of this trade-off. In Cherwell District Council’s 2018 HMO standards, a one or two-storey shared house of three to five people has two routes. With a bedroom of at least 6.51 m² for one adult (11 m² for two), the house also needs a separate living room of 11 m² or a combined kitchen and living room of 18 m². With a bedroom of at least 8.5 m² (14 m² for two), a one or two-storey house needs no extra communal living room, but the 7 m² minimum kitchen still applies. In a house of three or more storeys, the larger-bedroom route also asks for either a 13 m² kitchen and diner or an 11 m² dining room within one floor of the kitchen, unless every bedroom is within one floor of the kitchen.
The legal minimum bedroom size for one adult in a licensable HMO is 6.51 m², and for two adults it is 10.22 m². The council uses its standards when it decides whether an HMO is suitable for licensing, so they come from the licensing side of the council, not from planning.
Those standards are written for HMOs, and a purpose-built scheme may be assessed differently. Ask the council early: planning pre-application advice on use class and permission, and the private sector housing team on licensing and standards. Cherwell itself says it recommends getting its advice before you invest in or create an HMO.
What size kitchen and dining space does a coliving house need?
Size it for the evening peak, not the daily average. In many shared homes, people cook in the same hour or two after work, and that is when a single hob shared by ten people starts to cause friction.
The council’s standards give a floor for how many sets of kitchen facilities a shared house needs.
| People sharing | Minimum kitchen provision (Cherwell HMO Standards 2018) |
|---|---|
| 3 to 5 | 1 complete set of facilities |
| 6 to 7 | 2 complete sets of facilities |
| 8 to 10 | 2 complete sets, with at least 2000 mm x 600 mm of worktop |
| 11 or more | At least 2 separate kitchens with 3 complete sets between them |
The same document sets a minimum kitchen room size of 7 m² for three to five people and 10 m² for six to ten. Kitchens must be usable at all times of day, and no more than two floors from the rooms they serve.
Past the minimum, size the dining table for the group that eats together at weekends, not for everyone in the building. One large table does more for a house than extra stools along a counter. Give each resident their own fridge and cupboard space, and fit an extractor that actually clears the room.

Where do quiet zones, desks, laundry and storage fit?
Put them where they stop competing with the noisy rooms. A desk in a bedroom works until the resident needs a call room too, and a laundry against a bedroom wall hums at 11pm.
Many residents will work at a bedroom desk by default, so give every room a proper one. Then add at least one shared quiet space with a door, sockets and good Wi-Fi coverage. An open corner of the lounge does not count. Ask the services engineer to plan wireless coverage floor by floor.
For laundry, check drainage, ventilation and where the dryer vents or condenses before you fix the room. Put it away from bedrooms, and allow enough machines that nobody queues on a Sunday evening. Storage needs more thought than it usually gets. Residents in a coliving home often arrive with suitcases and bikes, and they have nowhere to put them if the plan has none.
Bins are a planning matter, too. Cherwell’s standards note that flats and other multi-occupancy buildings may need specially built bin stores, and that their size and design are usually settled at planning and development stage.
How do you control noise between rooms?
Treat acoustics as a layout decision first and a specification second. The cheapest sound insulation is not putting a lounge, kitchen or laundry against a bedroom wall.
The baseline is Part E of the Building Regulations. Approved Document E is the statutory guidance on meeting it, and it covers sound insulation in dwelling-houses, flats and rooms for residential use. Building control confirms how it applies to a given scheme, including a conversion. Treat it as a minimum. Shared homes get used late and early, with someone cooking at midnight and someone else leaving for a shift at 5am, and that is a different pattern from a typical family flat.
It is worth asking an acoustic consultant whether to go beyond the minimum wherever a living space or wet room sits beside or above a bedroom. Cheap details help too: solid doors with closers so they don’t slam, a lobby between a corridor and the bedroom doors, and quiet extract fans in en-suites.
Which outdoor spaces and finishes hold up in daily use?
Choose hard-wearing, standard parts that are easy to replace. A room closed for repairs is a room not earning rent, so a worn door, worktop or floor should be a one-afternoon fix.
The council’s baseline already points that way. Its standards ask for smooth, non-porous sinks and worktops, tiled splashbacks, non-slip bathroom floors and fixed heaters rather than portable ones. Beyond that, use common sizes and fittings so you can hold spares, and avoid bespoke items that take weeks to reorder.
A garden, terrace or balcony takes pressure off the shared rooms. Plan seating, lighting, drainage and cycle storage together, not as leftovers. Planting is a maintenance cost as well. If you specify large planters or a living wall, name who waters them and how they get water.
What does B-Hive Living say about coliving design?
B-Hive Living describes itself as a “multi award-winning brand, operator and asset manager of coliving properties”. It lists four pillars: biophilic design, From Me to We, wellness-led experiences and strong ethics.
Its landlord page says it designs and operates coliving properties for private owners, with a focus on wellness-driven design, community experiences and tech-enabled operation. For developers, the institutional investor page asks “Are you a developer?” and offers to “design, operate and tailor your project to appeal to today’s renters”. It also lists ground up design and build partnerships as one of four ways to partner.
What each pillar changes in a floor plan is a fair question to put to any operator, along with what has been built, who runs it today and what the design principles altered in the drawings. If you own an existing shared house rather than a site, the landlord page is the better starting point. If the site is an existing hotel, our guide to hotel to coliving conversion feasibility questions covers what to ask before you commit.
Frequently asked questions
How big should a coliving bedroom be?
The legal minimum in a licensable HMO is 6.51 m² for one adult and 10.22 m² for two. Cherwell’s standards ask for more for two people: 11 m² where the house also has a separate living room, or 14 m² on the larger-bedroom route where it does not. They also say that rooms under 4.64 m² must not be used as bedrooms in any circumstances.
How many bathrooms does a shared house need?
Cherwell’s ratios are one bathroom with a toilet for up to four people, one bathroom plus a separate toilet for five, and two bathrooms and two toilets for six to ten. Someone with a complete en-suite (shower or bath, toilet and basin) is left out of the count, which is one reason en-suite rooms reduce the shared bathroom provision you need.
Does a large coliving scheme need planning permission as an HMO?
Cherwell says planning permission is needed to create any large HMO, which means seven or more tenants. For a small HMO of three to six tenants, permission is not generally required for a change from a single family home, though other changes may need it. Any HMO with five or more tenants from two or more households also needs a licence. Confirm the position for your site with the council before you commit, and see our HMO licensing guide for Oxfordshire landlords.
When should an operator join the design team?
As early as you can, before the layout is fixed, because kitchens, laundry and maintenance routes are hard to move later. An operator can tell you where residents queue, what breaks and how often a room turns over. Ask any operator for evidence of schemes they have helped design, not only ones they run. Our questions to ask a coliving operator are a starting list.
Who else should review the design?
A fire safety adviser and an acoustic consultant are the obvious ones. Cherwell includes a fire risk assessment that meets the Regulatory Reform (Fire Safety) Order 2005 as a standard condition of every HMO licence it issues. Building control and the planning team should see the scheme before the drawings are final.
Talk to B-Hive Living about a coliving development
If you are weighing a coliving scheme, the institutional investor page sets out B-Hive Living’s four partnership routes and how to get in touch.
Sources
- Houses in multiple occupation | Cherwell District Council checked October 2026
- Resistance to sound: Approved Document E - GOV.UK GOV.UK (Ministry of Housing, checked October 2026
- Planning controls for HMOs | Planning controls for HMOs | Cherwell District Council checked October 2026
- HMO Licensing Policy 2024 Cherwell District Council, checked October 2026


